Skip to content

Calculation Procedure

The general procedure for generating a hydraulic calculation is as follows:

This includes printing the submittal calculation. Some of the steps below are optional, depending on your needs. These are labelled as such.

  1. Enter Project Name and Project Date

  2. Save job

  3. Enter Equivalent K Piping (optional)

  4. Enter System Piping

  5. Enter Hose Flows

  6. Enter Water Supply (optional)

  7. Enter Check Line Piping (optional)

  8. Review Calculation Input (optional)

  9. Calculate System

  10. View Calculation

  11. Adjust Piping and Input as necessary to get proper cushion. Repeat as necessary.

  12. Calculate system for final time

  13. Create Information Sheet

  14. Save job

  15. Print Job to HydraVIEW or PDF format